CALL US TOLL FREE 877-841-2455

 Back To Main TENS/EMS Page - Electrodes -  Home

ARISTA SD PLUS TENS

Click on Picture to Purchase Online

Electrodes - to add extra Electrode Pads to your order click here!!

PRESCRIPTION ORDER FORM FOR TENS-Please fax to (877) 512-3015

The ARISTA STRENGTH DURATION unit reduces pain by controlling each channel independently.  This is a Tens Unit that operates with Burst, Normal or Modulation modes.  This is a dual channel unit, which allows you to use up to four electrodes at a time (two electrodes per channel).  It comes with an AC/DC adaptor that plugs into the wall or it can work with a 9 volt battery.  $109

All of our TENS are shipped complete with:  Instruction manual, lead wires, four reusable electrodes, adaptor and a carrying case.  You should receive the TENS within five business days of placing the order (usually before) if you are located in the U.S.A.  If you need the package next day or 2nd day, please call us and we will Guarantee that delivery.   We can ship internationally.  However, rates and time of arrival will vary with destination.  Please fax your prescription to (877) 512-3015.  Testimonials

Our Guarantee to You:

• If you are not 100% satisfied with the results you are receiving from your TENS, as long as it is returned in good condition within 45 days, you will be issued a FULL REFUND. (Send to: Returns Dept., 9590 Fargo Rd., East Bethany, NY  14054)
• Our TENS Machines come with a 5 Year Warranty.  If you are having any problems with your TENS, send it back to the address above and a new replacement unit will be shipped out to you immediately.  
• Our knowledgeable staff are here to help you with any concerns and questions.

All values have 10% +/- tolerance

MODE SELECTIONS-The SD TENS offers six settings on the mode switch.  

Burst Mode- This mode provides a series of seven pulses at a fixed rate of 80Hz.  Bursts occur two times per second.  

Normal Mode- This mode provides standard stimulation for TENS.  

Modulation Modes- The four modulation modes are designed for the patient to obtain maximum comfort from TENS.  Individual preferences can be met with these additional modes, improving patient compliance.  Modulation of the TENS output parameters:  width, rate and amplitude may prevent the nervous system from accommodating to the continuous mode of TENS, thus improving duration of pain relief.  

A.  Strength-Duration Modulation (SD):  Strength-Duration Modulation consists of alternating modulated amplitude and width so that one parameter is always decreasing while the other is increasing and vice versa.  The amplitude decreases 60% from the amplitude control setting and returns to that setting.  The width decreases 50% from the width control setting and returns to that setting.  Total cycle time is six seconds.

B.  Modulated Width (MW):  Pulse width decreases 48% (pulse width= 250 u sec.), 33% (pulse width= 180 u sec.) from the selected value, and then returns to the selected value.  Total cycle time is six seconds.

C.  Modulated Rate (MR):  Pulse rate decreases 63% (pulse rate= 150 Hz), 56% (pulse rate= 100 Hz) from the selected value, and then returns to the selected value.  Total time is six seconds.

D.  Combination Modulation (CM):  Combination modulation consists of alternating modulated width and modulated rate so that one parameter is always decreasing while the other is increasing and vice versa.

mailto:sales@paincontrolproducts.com

Home - Biofreeze - TENS & EMS - Electrodes - Testimonials - Privacy Policy/Contact Us